Promise Technology FastTrak S150 SX4 Manual do Utilizador descarregar pdf (Página 5)

Quick Start Guide

Step 3: Install the FastTrak Card

The FastTrak RAID Controller card fits into any available:

• 32-bit PCI slot (must be PCI 2.2 compliant)

• The 32-bit portion of a 64-bit PCI slot

on the PC’s motherboard (see Figure 1 below).

1. Remove the cover of your system.

2. Remove the inside slot cover of an available 32-bit PCI slot on the

motherboard.

3. Install the FastTrak card into the open slot (see Figure 1 below). Secure the

bracket to the system’s frame.

4. Attach your system case’s 2- or 4-pin LED cable to the LED connector on

the FastTrak card (see Figures 2 and 3, below). Make sure that pin 1 on the

connector is aligned with pin 1 of the cable.

5. Fasten the FastTrak card bracket to the system case (see below).

Figure 1. Insert the FastTrak card into an open PCI slot.

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Promise Technology FastTrak S150 SX4 Manual do Utilizador Página 5