Promise Technology Network Device EX8650 Manual do Utilizador descarregar pdf (Página 222)

SuperTrak EX Series User Manual

208

temppollint=Drive temperature polling interval in seconds. If value is 0,

polling is disabled. For subsystems with dual controllers.

15..255

mediumerrorthreshold=

Medium error threshold. If the threshold is reached, the

physical drive is marked as dead. The default value is 0,

indicating that physical drive is not marked as dead for

medium errors. For subsystems with dual controllers.

0..4294967294

The following settings are only for SATA drives:

dmamode= For SATA drive only. Attempt to negotiate at the specified

DMA transfer mode. If a DMA transer mode cannot be

negotiate, the next slower mode is attempted until a

mode can be negotiated (udma5, udma4....udma0,

mdma 2.....mdma0).

udma0 Ultra DMA Mode 0

udma1 Ultra DMA Mode 1

udma2 Ultra DMA Mode 2

udma3 Ultra DMA Mode 3

udma4 Ultra DMA Mode 4

udma5 Ultra DMA Mode 5

mdma0 Multi DMA Mode 0

mdma1 Multi DMA Mode 1

mdma2 Multi DMA Mode 2

speed= Set the speed of physical drive(s).

1.5gb 1.5 GB/s

3gb 3 GB/s

auto Automatic

The following settings are only for SAS drives:

readcache= Applied to SAS drive only. Enables or disables read

cache on the physical drive(s).

enable

disable

-v Verbose mode. Used with -a list.

Examples

phydrv

phydrv -v

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 317 318

Sem comentários

Promise Technology Network Device EX8650 Manual do Utilizador Página 222