Promise Technology VessRAID 1000s Series Manual descarregar pdf (Página 34)

100

101

VessRAID 1000f, 1000i, 1000s Series Product Manual

Mounting VessRAID in a Rack

The VessRAID subsystem installs into your rack using the supplied mounting

rails. You can also use your existing rails.

Cautions

• At least two persons are required to safely lift, place, and

attach the VessRAID unit into a rack system.

• Do not lift or move the VessRAID unit by the handles, power

supplies or the controller units. Hold the subsystem itself.

• Do not install the VessRAID unit into a rack without rails to

support the subsystem.

• Only a qualified technician who is familiar with the installation

procedure should mount and install the VessRAID unit.

• Be sure all switches are OFF before installing the VessRAID

unit or exchanging components.

• Mount the rails to the rack using the appropriate screws and

flange nuts, fully tightened, at each end of the rail.

• Do not load the rails unless they are installed with screws as

instructed.

• The rails that ship with the PROMISE VessRAID unit are

designed to safely support that PROMISE VessRAID unit

when properly installed. Additional loading on the rails is at

the customer’s risk.

• PROMISE Technology, Inc. cannot guarantee that the

mounting rails will support your PROMISE VessRAID unit

unless you install them as instructed.

Note

To lighten the VessRAID enclosure, remove the power supplies.

Replace the power supplies after the VessRAID unit is mounted in

your rack.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 461 462

Comentários a estes Manuais

Sem comentários

Promise Technology VessRAID 1000s Series Manual Página 34

Comentários a estes Manuais

Manuais e produtos relacionados com Controladores RAID Promise Technology VessRAID 1000s Series