Promise Technology VessRAID 1000i Series Manual descarregar pdf (Página 138)

VessRAID 1000i Series Product Manual

122

13. Click the Update button to enter the logical drive parameters.

14. Review the results. If there is remaining space the disk array, you can create

another logical drive, following the steps above. Each logical drive can have

a different set of parameters.

15. Click the Next button when you are done.

A new window displays with the disk array information and the proposed

logical drives with their parameters.

16. Click the Submit button create the logical drives.

The new logical drive appears in the Logical Drive List the Information tab.

If you created a fault-tolerant logical drive (any RAID level except RAID 0), the

Operational Status of new logical drive will display Synchronizing for several

minutes after creation. You can use the logical drive during this period but read/

write performance could be slower than normal.

Deleting a Logical Drive

To delete a logical drive:

1. Click the Subsystem icon in Tree View.

2. Click the Disk Arrays icon.

3. Click the Disk Array icon.

4. Click the Delete LD tab in Management View.

5. Check the box to the left of the logical drive you want to delete.

6. Click the Submit button.

In the confirmation box, type the word confirm in the field provided.

7. Click the OK button.

The selected logical disappears from the Logical Drive List the Information tab.

Migrating a Disk Array

The action of migrating a disk array means either or both:

• Change the RAID Level

• Expand the storage capacity

Caution

All data the logical drive will be lost. Back up any valuable data

before deleting the logical drive.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 353 354

Sem comentários

Promise Technology VessRAID 1000i Series Manual Página 138